Updating Node Information

Here is where you change the information that is seen by the other nodes and http://status.vklink.com.au

  1. Change your node description, this would usually be Callsign, Where and Freq. Look at the http://status.vklink.com.au site for examples
  2. Restricted Status. If you chose Yes, it goes in the restricted list to show Foundations that it is a 6m or 23cm node. Meaning they should not connect to it.
  3. Domain Name. Change this if you have a fqdn, which you will need if you have a dynamic IP address.
  4. Port Number, you will not need to change this unless you are running two or more nodes behind a NAT.
  5. Latitude position. Enter this in Decimal form (ie -36.323423) for display on the google map.
  6. Longitude position. Enter this in Decimal form (ie 146.245345) for display on the google map.

Main page - Interfacing to an existing Repeater

Menu

Article:

Search: