Foundation licencees

As the ACMA does not allow foundation guys and girls to make and use an RF-Node system, I thought I'd share an idea I saw on .

It involves:

The pictures and diagrams here are courtesy of the hamvoip page, and as I get the chance to make one from Australian Bits, I will change the images and schematic.

The Alinco Mic runs from 5V so it can be powered from the USB socket of the Pi. You only need to run simpleusb for this project.

As our system can utilise the GPIO's of the Raspi, a lot of the hardware in these photos is not needed.


Main page